Model Training and Inference CLI Configurations

Launch CLI Arguments

GraphStorm’s model training and inference launch CLIs (both task-specific and task-agnostic) have a set of parameters to configure system enviornment for training and inference.

• workspace: the folder where launch command assume all artifacts were saved. If the other parameters’ file paths are relative paths, launch command will consider these files in the workspace.

  Note

  Users need to create the workspace folder beforehand to avoid errors.

• part-config: (Required) Path to a file containing graph partition configuration. The graph partition is generated by GraphStorm Partition tools.

  Note

  Use absolute path to avoid any path related problems. Otherwise, the file should be in workspace.

• ip-config: Path to a file containing IP addresses of instances in a distributed cluster. In the ip config file, each line stores one IP. This configuration is required only for model training and inference on distributed clusters.

  Note

  Use absolute path to avoid any path related problems. Otherwise, the file should be in workspace.

• num-trainers: The number of trainer processes per machine. Should >0.

• num-servers: The number of server processes per machine. Should >0.

• num-samplers: The number of sampler processes per trainer process. Should >=0.

• num-server-threads: The number of OMP threads in the server process. It should be small if server processes and trainer processes run on the same machine. Should >0. By default, it is 1.

• ssh-port: SSH port used by the host node to communicate with the other nodes in the cluster.

• ssh-username: Optional. When issuing commands (via ssh) to cluster, use the provided username in the ssh command.

• graph-format: The format of the graph structure of each partition. The allowed formats are csr, csc and coo. A user can specify multiple formats, separated by “,”. For example, the graph format is “csr,csc”.

• extra-envs: Extra environment parameters need to be set. For example, you can set the LD_LIBRARY_PATH and NCCL_DEBUG by adding:

  • –extra_envs LD_LIBRARY_PATH=/usr/local/cuda/lib64:$LD_LIBRARY_PATH

  • –extra-envs LD_LIBRARY_PATH=/usr/local/cuda/lib64:$LD_LIBRARY_PATH

  • NCCL_DEBUG=INFO

• do-nid-remap: Do GraphStorm node ID to Raw input node ID remapping for prediction results and node embeddings. Default is True.

Model Training and Inference Configurations

GraphStorm provides dozens of configurable parameters for users to control their training and inference tasks. You can use a yaml config file to define these parameters or you can use command line arguments to define and update these parameters. Specifically, GraphStorm parses yaml config file first. Then it parses arguments to overwrite parameters defined in the yaml file or add new parameters.

Yaml File Configurations

• cf or yaml-config-file: (Required) Path to the YAML configuration file.

Note

Below configurations can be set either in a YAML configuration file or be added as arguments of launch command.

Environment Configurations

• backend: PyTorch distributed backend, the suggested backend is gloo. Support backends include gloo and nccl.

  • Yaml: backend: gloo

  • Argument: --backend gloo

  • Default value: gloo

• verbose: Set true to print more execution information

  • Yaml: verbose: false

  • Argument: --verbose false

  • Default value: false

• use_graphbolt: Set true to use the GraphBolt graph representation during training. See https://docs.dgl.ai/stochastic_training/ for more details and Using GraphBolt to speed up training and inference for a complete example.

  • Yaml: use_graphbolt: true

  • Argument: --use-graphbolt true

  • Default value: false

GNN Model Configurations

GraphStorm provides a set of parameters to config the GNN model structure (input layer, gnn layer, decoder layer, etc)

• model_encoder_type: (Required) The Encoder module used to encode graph data. It can be a GNN encoder or a non-GNN encoder. A GNN encoder is composed of an input module, which encodes input node features, and a GNN module. A non-GNN encoder only contains an input module. GraphStorm supports five GNN encoders: rgcn which uses relational graph convolutional network as its GNN module, rgat which uses relational graph attention network as its GNN module, sage which uses GraphSage as its GNN module (only works with homogeneous graph), gat which uses graph attention network as its GNN module (only works with homogeneous graph) and hgt which uses heterogenous graph transformer as its GNN module. GraphStorm supports two non-GNN encoder: lm which requires each node type has and only has text features and uses language model, e.g., Bert, to encode these features and mlp which accepts various types of input node features (text feature, floating points and learnable embeddings) and finally uses an MLP to project these features into same dimension.

  • Yaml: model_encoder_type: rgcn

  • Argument: --model-encoder-type rgcn

  • Default value: This parameter must be provided by user.

• node_feat_name: User defined feature name. It accepts two formats like: a) fname, if all node types have the same node feature name, the corresponding feature name will be fname; b) ntype0:feat0 ntype1:featA …, if different node types have different node feature name(s). In the below example, ntype0 has a node feature named feat0 and ntype1 has two node features named featA and featB.

  • Yaml: node_feat_name:

    - "ntype0:feat0"

    - "ntype1:featA,featB"

  • Argument: --node-feat-name "ntype0:feat0 ntype1:featA,featB"

  • Default value: If not provided, there will be no node features used by GraphStorm even graphs have node features attached.

  Note

  Characters : and white space are not allowed to be used in node feature names. In Yaml format, users need to put each node’s feature in a separated line that starts with a hyphon.

• edge_feat_name: User defined edge feature name. It accepts two formats like: a) fname, if all edge types have the same feature name, the corresponding feature name will be fname; b) src_ntype1,etype1,dst_ntype1:feat0,… src_ntype2,etype2,dst_ntype2:featA …, if different edge types have different feature name(s). In the below example, src_ntype1,etype1,dst_ntype1 edge type has two edge features named feat0, and feat1, and src_ntype2,etype2,dst_ntype2 edge type has one edge feature named featA.

  • Yaml: edge_feat_name:

    - "src_ntype1,etype1,dst_ntype1:feat0,feat1"

    - "src_ntype2,etype2,dst_ntype2:featA"

  • Argument: —-edge-feat-name src_ntype1,etype1,dst_ntype1:feat0,feat1 src_ntype2,etype2dst_ntype2:featA

  • Default value: If not provided, there will be no edge features used by GraphStorm even graphs have edge features attached.

  Note

  In version 0.4, the RGCN encoder has been modified to support using edge features during message passing computation. If users would like to use edge features, please set the model_encoder_type to be rgcn. Otherwise, GraphStorm will raise an assertion error, warning that the chosen model encoder does not support edge features yet.

• edge_feat_mp_op: The operations to combine source node embeddings with edge embeddings during GNN message passing computation. Options include concat, add, sub, mul, and div. concat operation will concatenate source node embeddings with edge embeddings; add operation will add source node embeddings with edge embeddings; sub operation will subtract source node embeddings by edge embeddings; mul operation will multiply source node embeddings with edge embeddings; div operation will divide source node embeddings by edge embeddings.

  • Yaml: edge_feat_mp_op: "add"

  • Argument: -—edge-feat-mp-op add

  • Default value: concat.

  Note

  If the edge_feat_name configuration is not provided, the edge_feat_mp_op configuration will be ignored.

• num_layers: Number of GNN layers. Must be an integer larger than 0 if given. By default, it is set to 0, which means no GNN layers.

  • Yaml: num_layers: 2

  • Argument: --num-layers 2

  • Default value: 0

• hidden_size: (Required) The dimension of hidden GNN layers. Must be an integer larger than 0. Currently, each GNN layer has the same hidden dimension.

  • Yaml: hidden_size: 128

  • Argument: --hidden-size 128

  • Default value: This parameter must be provided by user.

• use_self_loop: Set true include self feature as a special relation in relational GNN models. Used by built-in RGCN and RGAT model.

  • Yaml: use_self_loop: false

  • Argument: --use-self-loop false

  • Default value: true

Built-in Model Specific Configurations

RGCN

• num_bases: Number of filter weight matrices. num_bases is used to reduce the overall parameters of a RGCN model. It allows weight metrics of different relation types to share parameters. Note: the number of relation types of the graph used in training must be divisible by num_bases. By default, num_bases is set to -1, which means weight metrics do not share parameters.

  • Yaml: num_bases: 2

  • Argument: --num-bases 2

  • Default value: -1

RGAT

• num_heads: Number of attention heads.

  • Yaml: num_heads: 8

  • Argument: --num-heads 8

  • Default value: 4

Model Save/Restore Configurations

GraphStorm provides a set of parameters to control how and where to save and restore models.

• save_model_path: A path to save GraphStorm model parameters and the corresponding optimizer status. The saved model parameters can be used in inference or model fine-tuning. See restore_model_path for how to retrieve a saved model and restore_optimizer_path for how to retrieve optimizer status.

  • Yaml: save_model_path: /model/checkpoint/

  • Argument: --save-model-path /model/checkpoint/

  • Default value: If not provide, models will not be saved.

• save_embed_path: A path to save generated node embeddings.

  • Yaml: save_embed_path: /model/emb/

  • Argument: --save-embed-path /model/emb/

  • Default value: If not provide, models will not be saved.

• save_model_frequency: Number of iterations to save model once. By default, GraphStorm will save models at the end of each epoch if save_model_path is provided. A user can set a positive integer, e.g. N, to let GraphStorm save models every N` iterations (mini-batches).

  • Yaml: save_model_frequency: 1000

  • Argument: --save-model-frequency 1000

  • Default value: -1. GraphStorm will not save models within an epoch.

• topk_model_to_save: The number of top best GraphStorm model to save. By default, GraphStorm will keep all the saved models in disk, which will consume huge number of disk space. Users can set a positive integer, e.g. K, to let GraphStorm only save K models with the best performance.

  • Yaml: topk_model_to_save: 3

  • Argument: --topk-model-to-save 3

  • Default value: 0. GraphStorm will save all the saved models in disk.

• save_perf_results_path: Folder path to save performance results of model evaluation.

  • Yaml: save_perf_results_path: /model/results/

  • Argument: --save-perf-results-path /model/results/

  • Default value: None

• task_tracker: A task tracker used to formalize and report model performance metrics. Now GraphStorm only supports sagemaker_task_tracker which prints evaluation metrics in a formatted way so that a user can capture those metrics through SageMaker. See Monitor and Analyze Training Jobs Using Amazon CloudWatch Metrics for more details.

  • Yaml: task_tracker: sagemaker_task_tracker

  • Argument: --task_tracker sagemaker_task_tracker

  • Default value: sagemaker_task_tracker

• restore_model_path: A path where GraphStorm model parameters were saved. For training, if restore_model_path is set, GraphStom will retrieve the model parameters from restore_model_path instead of initializing the parameters. For inference, restore_model_path must be provided.

  • Yaml: restore_model_path: /model/checkpoint/

  • Argument: --restore-model-path /model/checkpoint/

  • Default value: This parameter must be provided if users want to restore a saved model.

• restore_model_layers: Specify which GraphStorm neural network layers to load. This argument is useful when a user wants to pre-train a GraphStorm model using link prediction and fine-tune the same model on a node or edge classification/regression task. Currently, three neural network layers are supported, i.e., embed (input layer), gnn and decoder. A user can select one or more layers to load.

  • Yaml: restore_model_layers: embed

  • Argument: --restore-model-layers embed,gnn

  • Default value: Load all neural network layers

• restore_optimizer_path: A path storing optimizer status corresponding to GraphML model parameters. This is used when a user wants to fine-tune a model from a pre-trained one.

  • Yaml: restore_optimizer_path: /model/checkpoint/optimizer

  • Argument: --restore-optimizer-path /model/checkpoint/optimizer

  • Default value: This parameter must be provided if users want to restore a saved optimizer.

Model Training Hyper-parameters Configurations

GraphStorm provides a set of parameters to control training hyper-parameters.

• fanout: The fanouts of GNN layers. The fanouts must be integers larger than 0. The number of fanouts must equal to num_layers. It accepts two formats: a) “20,10”, it defines number of neighbors to sample per edge type for each GNN layer with the ith element being the fanout for the ith GNN layer. In the example, the fanout of the 0th GNN layer is 20 and the fanout of the 1st GNN layer is 10. b) "etype2:20@etype3:20@etype1:10,etype2:10@etype3:4@etype1:2". It defines the numbers of neighbors to sample for different edge types for each GNN layers with the i-th element being the fanout for the i-th GNN layer. In the example, the fanouts of etype2, etype3 and etype1 of 0th GNN layer are 20, 20 and 10 respectively and the fanouts of etype2, etype3 and etype1 of 0th GNN layer are 10, 4 and 2 respectively. Each etype (e.g., etype2) should be a canonical etype in format of "srcntype/relation/dstntype"

  • Yaml: fanout: 10,10

  • Argument: --fanout 10,10

  • Default value: This parameter must be provided by user. But if set the --num_layers to be 0, which means there is no GNN layer, no need to specify this configuration.

• dropout: Dropout probability. Dropout must be a float value in [0,1). Dropout is applied to every GNN layer(s).

  • Yaml: dropout: 0.5

  • Argument: --dropout 0.5

  • Default value: 0.0

• lr: (Required) Learning rate. Learning rate for dense parameters of input encoder, model encoder and decoder.

  • Yaml: lr: 0.5

  • Argument: --lr 0.5

  • Default value: This parameter must be provided by user.

• max_grad_norm: Gradient clip which limits the magnitude of gradients during training in order to prevent issues like exploding gradients and improve the stability and convergence of the training process.

  • Yaml: max_grad_norm: 0.1

  • Argument: --max-grad-norm 0.1

  • Default value: None

• grad_norm_type: Type of norm that is used to compute the gradient norm.

  • Yaml: grad_norm_type: inf

  • Argument: grad_norm_type 2

  • Default value: 2.0

• num_epochs: Number of training epochs. Must be integer.

  • Yaml: num_epochs: 5

  • Argument: --num-epochs 5

  • Default value: 0. By default only do testing/inference.

• batch_size: (Required) Mini-batch size. It defines the batch size of each trainer. The global batch size equals to the number of trainers multiply the batch_size. For example, suppose we have 2 machines each with 8 GPUs and set batch_size to 128. The global batch size will be 2 * 8 * 128 = 2048.

  • Yaml: batch_size: 128

  • Argument: --batch_size 128

  • Default value: This parameter must be provided by user.

• sparse_optimizer_lr: Learning rate of sparse optimizer. Learning rate for the optimizer corresponding to learnable sparse embeddings.

  • Yaml: sparse_optimizer_lr: 0.5

  • Argument: --sparse-optimizer-lr 0.5

  • Default value: same as lr.

• use_node_embeddings: Set true to create and use extra learnable node embeddings for nodes. These learnable embeddings will be concatenated with nodes’ own features to form the inputs for model training.

  • Yaml: use_node_embeddings: true

  • Argument: --use-node-embeddings true

  • Default value: false

• wd_l2norm: Weight decay used by torch.optim.Adam.

  • Yaml: wd_l2norm: 0.1

  • Argument: --wd-l2norm 0.1

  • Default value: 0

• alpha_l2norm: Coefficiency of the l2 norm of dense parameters. GraphStorm adds a regularization loss, i.e., l2 norm of dense parameters, to the final loss. It uses alpha_l2norm to re-scale the regularization loss. Specifically, loss = loss + alpha_l2norm * regularization_loss.

  • Yaml: alpha_l2norm: 0.00001

  • Argument: --alpha-l2norm 0.00001

  • Default value: 0.0

• num_ffn_layers_in_input: Graphstorm provides this argument as an option to increase the size of the parameters in the input layer. This argument will add an MLP layer after computing the input embeddings for each node type. It accepts an integer greater than zero. Generally, embeds = MLP(embeds) for each node type in the input layer. If the input is n, it could add n Feedforward neural network layers in the MLP.

  • Yaml: num_ffn_layers_in_input: 1

  • Argument: --num-ffn-layers-in-input 1

  • Default value: 0

• num_ffn_layers_in_gnn: Graphstorm provides this argument as an option to increase the size of the parameters between gnn layers. This argument will add an MLP layer at the end of each GNN layer. Generally, h = MLP(h) between GNN layers in a GNN model. If the input here is n, it could add n feedforward neural network layers here.

  • Yaml: num_ffn_layers_in_gnn: 1

  • Argument: --num-ffn-layers-in-gnn 1

  • Default value: 0

• num_ffn_layers_in_decoder: Graphstorm provides this argument as an option to increase the size of the parameters in the decoder layer. This argument will add an MLP layer before the last layer of a decoder. If the input here is n, it could add n feedforward neural network layers. Please note, it is only effective when the decoder is an MLPEdgeDecoder or an MLPEFeatEdgeDecoder. Support for other decoders will be added later.

  • Yaml: num_ffn_layers_in_decoder: 1

  • Argument: --num-ffn-layers-in-decoder 1

  • Default value: 0

• input_activate: Graphstorm provides this argument as an option to change the activation function in the input layer. Please note, it only accepts ‘relu’ and ‘none’.

  • Yaml: input_activate: relu

  • Argument: --input-activate relu

  • Default value: none

• gnn_norm: Graphstorm provides this argument as an option to define the norm type for gnn layers. Please note, it only accepts ‘batch’ and ‘layer’ for batchnorm and layernorm respectively.

  • Yaml: gnn_norm: batch

  • Argument: --gnn-norm batch

  • Default value: none

Early stop configurations

GraphStorm provides a set of parameters to control early stop of training. By default, GraphStorm finishes training after num_epochs. One can use early stop to exit model training earlier.

Every time evaluation is triggered, GraphStorm checks early stop criteria. For the rounds within early_stop_burnin_rounds evaluation calls, GraphStorm will not use early stop. After early_stop_burnin_rounds, GraphStorm decides if stop early based on the early_stop_strategy. There are two strategies: 1) consecutive_increase, early stop is triggered if the current validation score is lower than the average of the last early_stop_rounds validation scores and 2) average_increase, early stop is triggered if for the last early_stop_rounds consecutive steps, the validation scores are decreasing.

• early_stop_burnin_rounds: Burning period calls to start considering early stop.

  • Yaml: early_stop_burnin_rounds: 100

  • Argument: --early-stop-burnin-rounds 100

  • Default value: 0.0

• early_stop_rounds: The number of rounds for validation scores used to decide if early stop.

  • Yaml: early_stop_rounds: 5

  • Argument: --early-stop-rounds 5

  • Default value: 3.

• early_stop_strategy: GraphStorm supports two strategies: 1) consecutive_increase and 2) average_increase.

  • Yaml: early_stop_strategy: consecutive_increase

  • Argument: --early-stop-strategy average_increase

  • Default value: average_increase

• use_early_stop: Set true to enable early stop.

  • Yaml: use_early_stop: true

  • Argument: --use-early-stop true

  • Default value: false

Model Evaluation Configurations

GraphStorm provides a set of parameters to control model evaluation.

• eval_batch_size: Mini-batch size for computing GNN embeddings in evaluation. You can set eval_batch_size larger than batch_size to speedup GNN embedding computation. To be noted, a larger eval_batch_size will consume more GPU memory.

  • Yaml: eval_batch_size: 1024

  • Argument: --eval-batch-size 1024

  • Default value: 10000.

• eval_fanout: (Required) The fanout of each GNN layers used in evaluation and inference. It follows the same format as fanout.

  • Yaml: eval_fanout: "10,10"

  • Argument: --eval-fanout 10,10

  • Default value: This parameter must be provided by user. But if set the --num_layers to be 0, which means there is no GNN layer, no need to specify this configuration.

• use_mini_batch_infer: Set true to do mini-batch inference during evaluation and inference. Set false to do full-graph inference during evaluation and inference. For node classification/regression and edge classification/regression tasks, if the evaluation set or testing set is small, mini-batch inference can be more efficient as it does not waste resources to compute node embeddings for nodes not used during inference. However, if the test set is large or the task is link prediction, full graph inference (set use_mini_batch_infer to false) is preferred, as it avoids recomputing node embeddings during inference.

  • Yaml: use_mini_batch_infer: false

  • Argument: --use-mini-batch-infer false

  • Default value: true

• eval_frequency: The frequency of doing evaluation. GraphStorm trainers do evaluation at the end of each epoch. However, for large-scale graphs, training one epoch may take hundreds of thousands of iterations. One may want to do evaluations in the middle of an epoch. When eval_frequency is set, every eval_frequency iterations, the trainer will do evaluation once. The evaluation results can be printed and reported.

  • Yaml: eval_frequency: 10000

  • Argument: --eval-frequency 10000

  • Default value: sys.maxsize. The system will not do evaluation.

• no_validation: Set true to avoid do model evaluation (validation) during training.

  • Yaml: no_validation: true

  • Argument: --no-validation true

  • Default value: false

• fixed_test_size: Set the number of validation and test data used during link prediction training evaluaiotn. This is useful for reducing the overhead of doing link prediction evaluation when the graph size is large.

  • Yaml: fixed_test_size: 100000

  • Argument: --fixed-test-size 100000

  • Default value: None, Use the full validation and test set.

Language Model Specific Configurations

GraphStorm supports co-training language models with GNN. GraphStorm provides a set of parameters to control language model fine-tuning.

• lm_tune_lr: Learning rate for fine-tuning language model.

  • Yaml: lm_tune_lr: 0.0001

  • Argument: --lm-tune-lr 0.0001

  • Default value: same as lr

• lm_train_nodes: Number of nodes used in LM model fine-tuning.

  • Yaml: lm_train_nodes: 10

  • Argument: --lm-train-nodes 10

  • Default value: 0

• lm_infer_batch_size: Batch size used in LM model inference.

  • Yaml: lm_infer_batch_size: 10

  • Argument: --lm-infer-batch-size 10

  • Default value: 32

• freeze_lm_encoder_epochs: Before fine-tuning LM model, how many epochs we will take to warmup a GNN model.

  • Yaml: freeze_lm_encoder_epochs: 1

  • Argument: --freeze-lm-encoder-epochs 1

  • Default value: 0

Task Specific Configurations

GraphStorm supports node classification, node regression, edge classification, edge regression and link prediction tasks. It provides rich task related configurations.

General Configurations

• task_type: (Required) Supported task type includes node_classification, node_regression, edge_classification, edge_regression, and link_prediction.

  • Yaml: task_type: node_classification

  • Argument: --task-type node_classification

  • Default value: This parameter must be provided by user.

• eval_metric: Evaluation metrics used during evaluation. The input can be a string specifying the evaluation metric to report or a list of strings specifying a list of evaluation metrics to report. The first evaluation metric in the list is treated as the primary metric and is used to choose the best trained model and for early stopping. Each learning task supports different evaluation metrics:

  • The supported evaluation metrics of classification tasks include accuracy, precision_recall, roc_auc, f1_score, per_class_f1_score, hit_at_k. Note that hit_at_k only works with binary classification tasks.

    • The k of hit_at_k can be any positive integer, for example hit_at_10 or hit_at_100. The term hit_at_k refers to the number of true positives among the top k predictions with the highest confidence scores.

  • The supported evaluation metrics of regression tasks include rmse, mse and mae.

  • The supported evaluation metrics of link prediction tasks include mrr, amri and hit_at_k. MRR refers to the Mean Reciprocal Rank with values between and 0 (worst) and 1 (best), and AMRI refers the Adjusted Mean Rank Index, with values ranging from -1 (worst) to 1 (best). An AMRI value of 0 is equivalent to random guessing or assigning the same score to all edges in the candidate set. For more details on these metrics see Link Prediction Metrics.

    • Yaml: eval_metric:

      - accuracy

      - precision_recall

      - hit_at_10

    • Argument: --eval-metric accuracy precision_recall hit_at_10

    • Default value:

      • For classification tasks, the default value is accuracy.

      • For regression tasks, the default value is rmse.

      • For link prediction tasks, the default value is mrr.

Classification and Regression Task

• label_field: (Required) The field name of labelled data in the graph data. For node classification tasks, GraphStorm use graph.nodes[target_ntype].data[label_field] to access node labels. For edge classification tasks, GraphStorm use graph.edges[target_etype].data[label_field] to access edge labels.

  • Yaml: label_field: color

  • Argument: --label-field color

  • Default value: This parameter must be provided by user.

• num_classes: (Required) The cardinality of labels in a classification task. Used by node classification and edge classification.

  • Yaml: num_classes: 10

  • Argument: --num-classes 10

  • Default value: This parameter must be provided by user.

• multilabel: If set to true, the task is a multi-label classification task. Used by node classification and edge classification.

  • Yaml: multilabel: true

  • Argument: --multilabel true

  • Default value: false

• multilabel_weights: Used to specify a weight of positive examples for each class in a multi-label classification task. This is used together with multilabel. It is feed into torch.nn.BCEWithLogitsLoss as pos_weight. The weights should be in the following format 0.1,0.2,0.3,0.1,0.0. Each field represents the weight of the positive answer for the class n. Suppose there are 3 classes. The multilabel_weights is set to 0.1,0.2,0.3. Class 0 will have weight of 0.1, class 1 will have weight of 0.2 and class 2 will have weight of 0.3. For more details, see BCEWithLogitsLoss. If not provided, all classes are treated equally.

  • Yaml: multilabel_weights: 0.1,0.2,0.3

  • Argument: --multilabel-weights 0.1,0.2,0.3

  • Default value: None

• imbalance_class_weights: Used to specify a manual rescaling weight given to each class in a single-label multi-class classification task. It is used in imbalanced label use cases. It is feed into torch.nn.CrossEntropyLoss. Each field represents a weight for a class. Suppose there are 3 classes. The imbalance_class_weights is set to 0.1,0.2,0.3. Class 0 will have weight of 0.1, class 1 will have weight of 0.2 and class 2 will have weight of 0.3. If not provided, all classes are treated equally.

  • Yaml: imbalance_class_weights: 0.1,0.2,0.3

  • Argument: --imbalance-class-weights 0.1,0.2,0.3

  • Default value: None

• return_proba: For classification task, this configuration determines whether to return probability estimates for each class or the maximum probable class. Set true to return probability estimates and false to return the maximum probable class.

  • Yaml: return_proba: true

  • Argument: --return-proba true

  • Default value: true

• save_prediction_path: Path to save prediction results. This is used in node/edge classification/regression inference.

  • Yaml: save_prediction_path: /data/infer-output/predictions/

  • Argument: --save-prediction-path /data/infer-output/predictions/

  • Default value: If not provided, it will be the same as save_embed_path.

Node Classification/Regression Specific

• target_ntype: The node type for prediction.

  • Yaml: target_ntype: movie

  • Argument: --target-ntype movie

  • Default value: For heterogeneous input graph, this parameter must be provided by the user. If not provided, GraphStorm will assume the input graph is a homogeneous graph and set target_ntype to “_N”.

Edge Classification/Regression Specific

• target_etype: The list of canonical edge types that will be added as training targets in edge classification/regression tasks, for example --train-etype query,clicks,asin or --train-etype query,clicks,asin query,search,asin. A canonical edge type should be formatted as src_node_type,relation_type,dst_node_type. Currently, GraphStorm only supports single task edge classification/regression, i.e., it only accepts one canonical edge type.

  • Yaml: target_etype:

    - query,clicks,asin

  • Argument: --target-etype query,clicks,asin

  • Default value: For heterogeneous input graph, this parameter must be provided by the user. If not provided, GraphStorm will assume the input graph is a homogeneous graph and set target_etype to (“_N”, “_E”, “_N”).

• remove_target_edge_type: When set to true, GraphStorm removes target_etype in message passing, i.e., any edge with target_etype will not be sampled during training and inference.

  • Yaml: remove_target_edge_type: false

  • Argument: --remove-target-edge-type false

  • Default value: true

• reverse_edge_types_map: A list of reverse edge type info. Each edge type is in the following format: head,relation,reverse_relation,tail. For example: [“query,adds,rev-adds,asin”, “query,clicks,rev-clicks,asin”]. For edge classification/regression tasks, if remove_target_edge_type is set true and reverse_edge_type_map is provided, GraphStorm will remove both target_etype and the corresponding reverse edge type(s) in message passing. In certain cases, any edge with target_etype or reverse target_etype will not be sampled during training and inference. For link prediction tasks, if exclude_training_targets is set to true and reverse_edge_type_map is provided, GraphStorm will remove both target edges with train_etype and the corresponding reverse edges with the reverse edge types of train_etype in message passing. In contrast to edge classification/regression tasks, for link prediction tasks, GraphStorm only excludes specific edges instead of all edges with target_etype or reverse target_etype in message passing.

  • Yaml: reverse_edge_types_map:

    - query,adds,rev-adds,asin

    - query,clicks,rev-clicks,asin

  • Argument: --reverse-edge-types-map query,adds,rev-adds,asin query,clicks,rev-clicks,asin

  • Default value: None

• decoder_type: Type of edge classification or regression decoder. Built-in decoders include DenseBiDecoder and MLPDecoder. DenseBiDecoder implements the bi-linear decoder used in GCMC. MLPEdgeDecoder simply applies Multilayer Perceptron layers for prediction.

  • Yaml: decoder-type: DenseBiDecoder

  • Argument: --decoder-type MLPDecoder

  • Default value: DenseBiDecoder

• num_decoder_basis: The number of basis for DenseBiDecoder in edge prediction task.

  • Yaml: num_decoder_basis: 2

  • Argument: --num-decoder-basis 2

  • Default value: 2

• decoder_edge_feat: A list of edge features that can be used by a decoder to enhance its performance.

  • Yaml: decoder_edge_feat:

    - "fname"

    Or

    decoder_edge_feat: | - query,adds,asin:count,price

  • Argument: --decoder-edge-feat fanme or --decoder-edge-feat query,adds,asin:count,price

  • Default value: None

Link Prediction Task

• train_etype: The list of canonical edge type that will be added as training target with the target edge type(s). If not provided, all edge types will be used as training target. A canonical edge type should be formatted as src_node_type,relation_type,dst_node_type.

  • Yaml: train_etype:

    - query,clicks,asin

    - query,adds,asin

  • Argument: --train-etype query,clicks,asin query,adds,asin

  • Default value: None

• eval_etype: The list of canonical edge type that will be added as evaluation target with the target edge type(s). If not provided, all edge types will be used as evaluation target. In some link prediction use cases, users want to train a model using all edges of a graph but only do link prediction on specific edge type(s) for downstream applications. In certain cases, they only care about the model performance on specific edge types.

  • Yaml: eval_etype:

    - query,clicks,asin

    - query,adds,asin

  • Argument: --eval-etype query,clicks,asin query,adds,asin

  • Default value: None

• exclude_training_targets: If it is set to true, GraphStorm removes the training targets from the GNN computation graph. If true, reverse_edge_types_map MUST be provided.

  • Yaml: exclude_training_targets: false

  • Argument: --exclude-training-targets false

  • Default value: true

• train_negative_sampler: The negative sampler used for link prediction training. Built-in samplers include uniform, joint, localuniform, all_etype_uniform and all_etype_joint.

  • Yaml: train_negative_sampler: uniform

  • Argument: --train-negative-sampler joint

  • Default value: uniform

• eval_negative_sampler: The negative sampler used for link prediction testing and evaluation. Built-in samplers include uniform, joint, localuniform, all_etype_uniform and all_etype_joint.

  • Yaml: eval_negative_sampler: uniform

  • Argument: --eval-negative-sampler joint

  • Default value: joint

• num_negative_edges: Number of negative edges sampled for each positive edge during training.

  • Yaml: num_negative_edges: 32

  • Argument: --num-negative-edges 32

  • Default value: 16

• num_negative_edges_eval: Number of negative edges sampled for each positive edge in the validation and test set.

  • Yaml: num_negative_edges_eval: 1000

  • Argument: --num-negative-edges-eval 1000

  • Default value: 1000

• lp_decoder_type: Set the decoder type for loss function in Link Prediction tasks. Currently GraphStorm support dot_product, distmult, rotate, transe_l1, and transe_l2.

  • Yaml: lp_decoder_type: dot_product

  • Argument: --lp-decoder-type dot_product

  • Default value: distmult

• gamma: Set the value of the hyperparameter denoted by the symbol gamma. Gamma is used in the following cases: i/ focal loss for binary classification ii/ DistMult score function for link prediction, iii/ TransE score function for link prediction, and iv/ RotatE score function for link prediction.

  • Yaml: gamma: 10.0

  • Argument: --gamma 10.0

  • Default value: None

• alpha: Set the value of the hyperparameter denoted by the symbol alpha. Alpha is used in focal loss for binary classification.

  • Yaml: alpha: 10.0

  • Argument: --alpha 10.0

  • Default value: None

• class_loss_func: Node/Edge classification loss function. Builtin loss functions include cross_entropy and focal.

  • Yaml: class_loss_func: cross_entropy

  • Argument: --class-loss-func contrastive

  • Default value: cross_entropy

• lp_loss_func: Link prediction loss function. Builtin loss functions include cross_entropy and contrastive.

  • Yaml: lp_loss_func: cross_entropy

  • Argument: --lp-loss-func contrastive

  • Default value: cross_entropy

• adversarial_temperature: Enable adversarial cross entropy loss and set the adversarial_temperature hyper-parameter. Only work when lp_loss_func is set to cross_entropy. More details can be found on the Link Prediction Loss Functions.

  • Yaml: adversarial_temperature: 1.0

  • Argument: adversarial-temperature 1.0

  • Default value: None

• lp_edge_weight_for_loss: Edge feature field name for edge weight. The edge weight is used to rescale the positive edge loss for link prediction tasks.

  • Yaml: lp_edge_weight_for_loss:

    - "weight"

    Or

    lp_edge_weight_for_loss:

    - "ntype0,rel0,ntype1:weight0"

    - "ntype0,rel1,ntype1:weight1"

  • Argument: --lp-edge-weight-for-loss ntype0,rel0,ntype1:weight0 ntype0,rel1,ntype1:weight1

  • Default value: None

• contrastive_loss_temperature: Temperature of link prediction contrastive loss. This is used to rescale the link prediction positive and negative scores for the loss.

  • Yaml: contrastive_loss_temperature: 0.01`

  • Argument: --contrastive-loss-temperature 0.01

  • Default value: 1.0

• lp_embed_normalizer: Type of normalization method used to normalize node embeddings in link prediction tasks. Currently GraphStorm only supports l2 normalization (l2_norm).

  • Yaml: lp_embed_normalizer: l2_norm

  • Argument: --lp-embed-normalizer l2_norm

  • Default value: None

• train_etypes_negative_dstnode: The list of canonical edge types that have hard negative edges constructed by corrupting destination nodes during training. The format of the configuration is src_type,rel_type0,dst_type:negative_nid_field src_type,rel_type1,dst_type:negative_nid_field for each edge type to use different fields to store the hard negatives, or negative_nid_field for all edge types to use the same field to store the hard negatives.

  • Yaml: train_etypes_negative_dstnode:

    - src_type,rel_type0,dst_type:negative_nid_field

    - src_type,rel_type1,dst_type:negative_nid_field

    Or

    train_etypes_negative_dstnode: negative_nid_field

  • Argument: --train-etypes-negative-dstnode src_type,rel_type0,dst_type:negative_nid_field src_type,rel_type1,dst_type:negative_nid_field

  • Default value: None

• num_train_hard_negatives: Number of hard negatives to sample for each edge type during training. The format of the configuration is src_type,rel_type0,dst_type:num_negatives src_type,rel_type1,dst_type:num_negatives for each edge type to have number of hard negatives, or num_negatives for all edge types to have the same number of hard negatives.

  • Yaml: num_train_hard_negatives:

    - src_type,rel_type0,dst_type:num_negatives

    - src_type,rel_type1,dst_type:num_negatives

  Or

  num_train_hard_negatives: num_negatives

  • Argument: num_train_hard_negatives src_type,rel_type0,dst_type:num_negatives src_type,rel_type1,dst_type:num_negatives

  • Default value: None

• eval_etypes_negative_dstnode: The list of canonical edge types that have hard negative edges constructed by corrupting destination nodes during evaluation. The format of the configuration is src_type,rel_type0,dst_type:negative_nid_field src_type,rel_type1,dst_type:negative_nid_field for each edge type to use different fields to store the hard negatives, or negative_nid_field for all edge types to use the same field to store the hard negatives.

  • Yaml: eval_etypes_negative_dstnode:

    - src_type,rel_type0,dst_type:negative_nid_field

    - src_type,rel_type1,dst_type:negative_nid_field

    Or

    eval_etypes_negative_dstnode: negative_nid_field

  • Argument: --eval-etypes-negative-dstnode src_type,rel_type0,dst_type:negative_nid_field src_type,rel_type1,dst_type:negative_nid_field

  • Default value: None

Distillation Specific Configurations

GraphStorm provides a set of parameters to control GNN distillation.

• textual_data_path: The path to load the textual data for distillation. User need to specify a path of directory with two sub-directory for train split and val split. In each split, there can be one or more *.parquet files. Find more details in graphstorm/training_scripts/gsgnn_dt/README.md.

  • Yaml: textual_data_path: <str>

  • Argument: --textual-data-path <str>

  • Default value: This parameter must be provided by user.

• max_distill_step: The maximum of training step for each node type for distillation.

  • Yaml: max_distill_step: 10000

  • Argument: --max-distill-step 10000

  • Default value: 10000

• max_seq_len: The maximum sequence length for tokenized textual data.

  • Yaml: max_seq_len: 1024

  • Argument: --max-seq-len 1024

  • Default value: 1024